Aluminium Trench Gratings

Aluminium Trench Gratings

banner_grate_home_alum.jpg


Lathamgrate aluminium trench gratings and frames are an economical, functional and attractive solution to exterior and interior drainage and ventilation problems.

The Lathamgrate serrated texture provides a dynamic and contemporary appearance to compliment today’s architectural designs. Unlike conventional gratings, the Lathamgrate has close centre bars, concealed welds and can be fabricated to form a radius. The Lathamgrate is available for trenches up to 300mm wide.

Lathamgrate  aluminium trench gratings and frames offer many benefits over competing products, fabricated from steel or cast iron. Aluminium and brass gratings are lightweight and attractive. 

Optional trench liners simplify installation and offer improved performance. Trench gratings are for exterior and interior use, including building entrances and wash-down areas. 

The grating bars are 6.25mm wide, which combined with the serrated surface help provide pedestrian safety. The closely spaced bearing bars reduce hazards in high heels. The Lathamgrate is designed for pedestrian traffic. 

For heavier applications and for block-ends, angles and radii grates contact Latham Australia before specifying.

Additional Links:

Good Design Asbra Safety Stair Treads.png
Australian-Made-Logo-Colour.jpg

Aluminium Serrated Top A B Open Flow Area per lineal metre of grate (cm2) Class Classification as per AS 3996 Number of 6.5mm Serrated T's
All measurements in millimetres. 
ALGLS-4S 80mm 110mm 480 B 7
ALGLS-5S 105mm 135mm 600 B 9
ALGLS-6S 130mm 165mm 720 A 11
ALGLS-8S 180mm 215mm 960 A 15
ALGLS-10S 230mm 267mm 1200 A 19
ALGLS-12S 280mm 306mm 1440 A 22

 

The ALGLS Series serrated top aluminium trench grates are designed predominantly for pedestrian applications. They are commonly used in office building entrances, homes, parks, recreational harbour or beach foreshores, schools, hospitals, hotels, showrooms, arenas, stadiums, exhibition and convention centres etc. 

The ALGLS Series consists of a frame that can be supplied with or without an integrated galvanised trench liner, making the frame and liner (if supplied) a permanent part of the floor, whilst the individual grating sections will drop into the frame, ensuring easy removal for access and cleaning. The ALGLS Series Grates and Frames can be supplied in custom lengths to 4000mm and factory manufactured fully welded angles and T’s are available for the grates, frames and trench liners if required. 

On request, the system is also available with block ends for the frames and trench liners. When the trench liner is used and factory fabricated block ends installed, the system will be an enclosed trough. Latham can also supply hidden locking mechanisms for the ALGLS Series Grate and/or welded spigots on the trench liner if required.

 

View and download our data sheets - PDF


Enquire About This Product

Aluminium Serrated Top B Open Flow Area per lineal metre of grate (cm2) Class Classification as per AS 3996 Number of 6.5mm Serrated T's
All measurements in millimetres. 
ALGPL-3S 75mm 300 B 4
ALGPL-4S 100mm 420 B 6
ALGPL-5S 125mm 540 B 8
ALGPL-6S 151mm 660 A 10
ALGPL-8S 204mm 900 A 14
ALGPL-10S 242mm 1140 A 17
ALGPL-12S 308mm 1380 A 22

The ALGPL Series serrated top aluminium trench grates are predominantly suitable for pedestrian applications such as residential and commercial towers, homes, parks, recreational harbour or beach foreshores, schools, hospitals, hotels, car showrooms, exhibition centres, arenas and stadiums etc.

The ALGPL Series are removable solid grate units. They are designed to sit on a formed step or trench base and have an overall depth of 60mm. Alternatively, they can sit on levelling rods in the slab, but they must be fully supported at the ends to ensure they do not lift when traffic passes over a joint in an extended run. They carry seamless welded cross supports at approximately 300mm centres. The grates can be supplied in custom lengths to 4000mm and factory manufactured fully welded angles and T’s are available.

 

View and download our data sheets - PDF


Enquire About This Product

Aluminium Serrated Top A B Open Flow Area per lineal metre of grate (cm2) Class Classification as per AS 3996 Number of 6.5mm Serrated T's
All measurements in millimetres. 
ALGNS-4S 56mm 100mm 440 B 7
ALGNS-5S 83mm 127mm 550 A 9
ALGNS-6S 108mm 152mm 660 A 11
ALGNS-8S 148mm 192mm 880 A 14
ALGNS-10S 200mm 244mm 1100 A 18
ALGNS-12S 251mm 295mm 1320 A 22

The ALGNS Series serrated top aluminium trench grates are for pedestrian applications. They are commonly used in office building entrances, home, parks, recreational harbour or beach foreshores, casinos, convention centres, exhibition centres,  schools, hospitals, hotels etc.  They are designed to sit over a preformed trench and require a 36mm deep x 25mm wide bearing platform on each side of the trench. The 3mm narrow view aluminium frame is mechanically fixed to the bearing platforms and the edge of the frame and grate should finish level with the surrounding floor finish.

The ALGNS Series are used in a range of applications both internally and externally. The ALGNS Series is supplied with the frame that is set on a preformed bearing platforms. The grates will simply drop into the frame making for easy removal for access and cleaning. The material can be supplied in custom lengths to 4000mm for the grate inserts whilst the aluminium angle frame can be supplied in lengths to 3600mm and factory manufactured fully welded angles and T’s are available as well as hidden locking mechanisms. The system is also available with end frame surrounds.

 

View and download our data sheets - PDF


Enquire About This Product

Aluminium Serrated Top A B Open Flow Area per lineal metre of grate (cm2) Class Classification as per AS 3996 Number of 6.5mm Serrated T's
All measurements in millimetres. 
ALGRS-3S 72mm 120mm 300 A 4
ALGRS-4S 97mm 145mm 420 A 6
ALGRS-5S 122mm 170mm 540 A 8
ALGRS-6S 147mm 195mm 660 A 10
ALGRS-8S 197mm 245mm 900 A 14
ALGRS-10S 249mm 295mm 1140 A 18
ALGRS-12S 297mm 345mm 1380 A 21

ALGRS Series  serrated top aluminium trench grates are designed for surface mounted pedestrian applications. They are commonly used in office building entrances, homes, parks, recreational harbour or beach foreshores, schools, hospitals, hotels, showrooms, arenas and stadiums etc. They are also commonly used for ventilation applications, such as floor AC vent covers or as access covers to floor under deck areas that require aesthetically pleasing and trafficable solutions. 

The ALGRS Series is supplied as a complete drop in unit system. It is self-supporting on the surround frames, making for easy removal for access and cleaning. The material can be supplied in custom lengths to 4000mm and factory manufactured fully welded angles and T’s are available for the surface mounted grate if required. The system is also available with end frame surrounds.

 

View and download our data sheets - PDF


Enquire About This Product

Aluminium Serrated Top A B Open Flow Area per lineal metre of grate (cm2) Class Classification as per AS 3996 Number of 6.5mm Serrated T's
All measurements in millimetres. 
ALGLSX-4S 80mm 110mm 470 A 80
ALGLSX-5S 105mm 135mm 590 A 80
ALGLSX-6S 130mm 160mm 710 A 80
ALGLSX-8S 172mm 202mm 912 A 80

The ALGLSX Series serrated top cross longitudinal aluminium trench grates are designed for pedestrian applications. They are commonly used in office building entrances, homes, parks, recreational harbour or beach foreshores, schools, hospitals, hotels, residential and commercial towers, showrooms, arenas and stadiums etc.

The ALGLSX Series cross longitudinal serrated top aluminium trench grates have the serrated T’s running across the trench width and are suitable for light duty applications. The ALGLSX cross longitudinal serrated top aluminium trench grate sections are supplied in custom lengths to 1000mm, but when butted together in the ALGLSX frame the joints are virtually invisible.

The ALGLSX Series consists of a frame that can be supplied with or without an integrated galvanised trench liner, making the frame and liner (if supplied) a permanent part of the floor. The individual grating sections, which are supplied in 1000mm lengths, will drop into the frame, making for easy removal for access and cleaning. Factory manufactured fully welded angles and T’s are available for the grates liners if required, but not available for the grate insert in the ALGLSX Series.

The system is also available with block ends for the frame and trench on request. When the trench liner is used and factory fabricated block ends installed, the system will be an enclosed trough. Latham can also supply hidden locking mechanisms for the ALGLSX Series if required and welded spigots can also be supplied on the trench liner if required.

Care should be taken when handling the ALGLSX grate inserts as these can easily be bent when not in their frames.

 

View and download our data sheets - PDF


Enquire About This Product

Aluminium Serrated Top A B C Open Flow Area per lineal metre of grate (cm2) Class Classification as per AS 3996 Number of 6.5mm Serrated T's
All measurements in millimetres. 
ALPAN-4S 100mm 172mm 100mm 340 A 4
ALPAN-6S 150mm 222mm 150mm 340 A 4
ALPAN-8S 200mm 272mm 200mm 340 A 4

The ALPAN Series tile inlay aluminium trench grates are designed for pedestrian applications. They are commonly used in office building entrances, homes, parks, recreational harbour or beach foreshores, schools, hospitals, hotels, residential and commercial office towers, showrooms, arenas and stadiums etc. 

The ALPAN Series tile inlay aluminium trench grates are designed to accommodate a stone or tile flooring inlay. The series is available with 3mm pan inlay widths of 100mm, 150mm and 200mm. The pan sits over the formed concrete trench and there is a 32mm wide grate on either side of the pan. The pan depth is 37mm. The grated pan insert is supported on welded integrated cross supports at approximately 250mm centres.

The entire system sits in a custom fabricated T frame with an overall depth of 60mm. The ALPAN Series is supplied in custom lengths to 2400mm. Factory manufactured fully welded angles and T’s are available for the ALPAN Series if required. The system is also available with welded frame ends and hidden locking mechanisms.

 

View and download our data sheets - PDF


Enquire About This Product

Aluminium Serrated Top A B C Unabated Clear Flow at Suppert Class Classification as per AS 3996 Number of 6.5mm Serrated T's
All measurements in millimetres. 
ALBATH-2S 16mm 58mm 50mm 16mm x 15mm A 3
ALBATH-3S 42mm 82mm 50mm 42mm x 15mm A 5
ALBATH-4S 68mm 108mm 50mm 68mm x 15mm A 7
ALBATH-6S 105mm 145mm 50mm 108mm x 15mm A 10

The Latham Grate range has now been extended to incorporate the ALBATH Series which are specifically designed for bathroom applications. The ALBATH Series incorporates fully sealed aluminium trench liners with block ends.These series are available as standard off the shelf units in the lengths and width detailed above, or in custom lengths.

As standard the external trough depth is 50mm which is usually suitable to a floor finish set down in a bathroom. Other depths are available on request.

The systems can be supplied with or without a metal spigot of the same material  extending to a depth of 100mm below the base of the trench liner for site cutting to suit. 

Finishes - As standard the grates and liners are mill finish aluminium depending on the model selected. On request and for an additional charge the aluminium units can be supplied with a chromed finish or the aluminium sections can be supplied in clear anodised finish. Stock standard units are available for the ALBATH-3S, ALBATH-4S in lengths of 1200mm. Custom lengths can be manufactured on request.

 

View and download our data sheets - PDF


Enquire About This Product

Aluminium Serrated Top B Open Flow Area per lineal metre of grate (cm2) Class Classification as per AS 3996 Number of 6.5mm Serrated T's
All measurements in millimetres. 
HDGPL-3S 75mm 360 C 4
HDGPL-4S 100mm 480 C 6
HDGPL-5S 125mm 600 C 8
HDGPL-6S 151mm 720 B 10
HDGPL-8S 204mm 960 B 14

HDGPL Series serrated top aluminium trench grates are suitable for vehicular traffic in light duty applications, such as residential driveways, parks, recreational harbour or beach foreshores, schools, hospitals, hotels, car showrooms, arenas and stadiums etc. They are specifically designed for car and light commercial traffic and, although not considered suitable for public roadway applications, they will accommodate heavier traffic on irregular occasions, such as occasional access for emergency vehicles etc. 

Whilst the HDGPL is designed for somewhat heavier applications than the standard Lathamgrate™ range. This range has slightly closer spaced cross supports at a maximum of 200mm centres and the cross support is of heavier construction, although this is unnoticeable when the grates are in application.

The HDGPL Series are removable solid grate units. They are designed to sit on a formed step or trench base and have an overall depth of 60mm. The grates can be supplied in custom lengths to 4000mm and factory manufactured fully welded angles and T’s are available.

 

View and download our data sheets - PDF


Enquire About This Product

Aluminium Serrated Top A B Open Flow Area per lineal metre of grate (cm2) Class Classification as per AS 3996 Number of 6.5mm Serrated T's
All measurements in millimetres. 
HDGLS-3S 55mm 85mm 240 C 5
HDGLS-4S 80mm 110mm 480 C 7
HDGLS-5S 105mm 135mm 600 B 9
HDGLS-6S 130mm 165mm 720 B 11

HDGLS Series serrated top aluminium trench grates are suitable  for vehicular traffic in light duty applications, such as residential driveways, parks, recreational harbour or beach foreshores, schools, hospitals, hotels, car showrooms, arenas and stadiums etc. They are specifically designed for car and light commercial traffic and although not considered suitable for public roadway applications, they will accommodate heavier traffic on irregular occasions, such as occasional access for emergency vehicles etc. The HDGLS is designed for somewhat heavier applications than the standard Lathamgrate™ range. This range has slightly closer spaced cross supports at a maximum of 200mm centres and the cross support is of heavier construction, although this is unnoticeable when the grates are in application.

The HDGLS Series consists of a frame that can be supplied with or without an integrated galvanised trench liner, making the frame and liner (if supplied) a permanent part of the floor. The individual grating sections will drop into the frame, making for easy removal for access and cleaning. The material can be supplied in custom lengths to 4000mm and factory manufactured fully welded angles and T’s are available for the grates and liners if required.

The system is also available with block ends for the frame and trench if required. When the trench liner is used and factory fabricated block ends installed, the system will be an enclosed trough. Latham can also supply hidden locking mechanisms for the HDGLS Series if required and welded spigots can also be supplied on the trench liner if required.

 

View and download our data sheets - PDF


Enquire About This Product

Have a question about your upcoming project or requirements?

form-bg.jpg