Through Bed Loc Strips

Latham Neoprene-X-Pansion Through Bed Loc Strips with closed cell polyethylene tail are the best method of ensuring that the joint under the Loc Strip is free from debris. The polyethylene tail is designed to go through the bed to the slab. The system is available with 6mm and 12mm neoprene insert widths.

Neoprene-X-Pansion Through Bed Loc Strips are designed to be used in all hard flooring applications and are designed to be installed in conjunction with wet bedded flooring applications.

Through Bed Loc Strips are supplied in standard lengths of 1800mm and installed so as to minimise the frequency of butt joints and short lengths. Also 3‑way and 4-way butt joint intersections should be avoided. Latham Neoprene-X-Pansion Through Bed Loc Strips are designed specifically for use with optional GW50/SSW50 Wire Anchors for maximum expansion and contraction.

Through Bed Loc Strips should be installed at all locations of stress concentration; at changes in direction; wherever localised movement is anticipated and around rigid and fixed large objects such as columns, stair and lift wells, light posts, across doorways, garden beds, manhole covers and embedded pipe work and anywhere that may impede expansion and contraction of the tiling.

All products are supplied in 1800mm lengths.

Loc Strips are supplied with the following metal sideplate thicknesses: standard brass & zinc products - 1mm thick; stainless steel type 304 - 0.7mm thick (note: stainless steel products are not recommended for finish to be ground insitu). Optional 3mm thick brass & zinc sideplates are also available, specify with 3mm sideplates when ordering: Brass: TBLSB3mm / Zinc: TBLSZ3mm.

Product Specifications How to Specify Guide

Additional Information:

Product Information

How to Install Guide

Design Criteria

Through Bed - 6mm Control Section

?? Insert the required overall depth including polyethylene section

6MM WIDE THROUGH BED NEOPRENE-X-PANSION LOC STRIP PROFILE GUIDE Specify Neoprene Colour, Wire Anchors and Overall Depth of the Product
Brass (1mm thick side plates)	Zinc (1mm thick side plates)	Stainless Steel (0.7mm thick side plates)	Metal Side Plate Depth	Accommodates Paving Maximum Thickness (with GW-50/SSW-50 wire anchors in place)
TBLSB-6 x 15/??	TBLSZ-6 x 15/??	TBLSS-6 x 15/??	31mm	15mm
TBLSB-6 x 35/??	TBLSZ-6 x 35/??	TBLSS-6 x 35/??	50mm	35mm
TBLSB-6 x 50/??	TBLSZ-6 x 50/??	TBLSS-6 x 50/??	65mm	50mm
TBLSB-6 x 65/??	TBLSZ-6 x 65/??	TBLSS-6 x 65/??	80mm	65mm
TBLSB-6 x 75/??	TBLSZ-6 x 75/??	TBLSS-6 x 75/??	90mm	75mm
TBLSB-6 x 85/??	TBLSZ-6 x 85/??	TBLSS-6 x 85/??	100mm	85mm
TBLSB-6 x 100/??	TBLSZ-6 x 100/??	TBLSS-6 x 100??	115mm	100mm
☛ Custom heights to accommodate custom floor finish thicknesses available on request. ☛ ?? Denotes overall depth of the product required.

Brass	Zinc	Stainless Steel	Metal Side Plate Depth	Accommodates Paving Maximum Thickness
All dimensions in millimetres. Standard neoprene colour black. Grey & buff available on request.
TBLSB-6x15/?	TBLSZ-6x15/?	TBLSS-6x15/?	31mm	15mm
TBLSB-6x35/?	TBLSZ-6x35/?	TBLSS-6x35/?	50mm	35mm
TBLSB-6x50/?	TBLSZ-6x50/?	TBLSS-6x50/?	65mm	50mm
TBLSB-6x65/?	TBLSZ-6x65/?	TBLSS-6x65/?	80mm	65mm
TBLSB-6x75/?	TBLSZ-6x75/?	TBLSS-6x75/?	90mm	75mm
TBLSB-6x85/?	TBLSZ-6x85/?	TBLSS-6x85/?	100mm	85mm
TBLSB-6x100/?	TBLSZ-6x100/?	TBLSS-6x100/?	115mm	100mm

Latham Neoprene-X-Pansion Through Bed Loc® Strips, with closed cell polyethylene tail, are the best method of ensuring that the void under the Loc® Strip through the bed to the structural slab is maintained and free of debris.

Latham 6mm Neoprene-X-Pansion Through Bed Loc® Strips are generally used in interior applications where the expected thermal expansion of floor finish would be considered less than an external application. They are also suitable for external applications as well, however the bay sizes or distance between the strips will need to be reduced (see pages 4-6 for further set out and spacing details).

Latham 6mm Neoprene-X-Pansion Through Bed Loc® Strips with 1mm Bars and Zinc and 0.7mm Stainless Steel side plates are intended to be used in all hard flooring applications and are designed to be installed in conjunction with wet bedded flooring applications (see page 53 for further installation details).

Latham 6mm Neoprene-X-Pansion Through Bed Loc® Strips are supplied in standard 1800mm lengths and should be installed so as to minimise the frequency of butt joints and short lengths. Also 3-way and 4-way butt joint intersections should be avoided (see page 54 for further details).

All Latham Neoprene-X-Pansion Through Bed Loc® Strips are designed specifically for use with optional GW50/SSW50 Wire Anchors for maximum control. For further information and specification details available, see page 55 of catalogue.

Latham Neoprene-X-Pansion Through Bed Loc® Strips should be installed in all locations of stress concentration; at changes in direction; wherever localised movement is anticipated and around rigid and fixed large objects such as columns, stair and lift wells, light posts, across driveways, at access covers, across doorways and anywhere that may impede expansion and contraction of the floor finish.

View and download our data sheets - PDF

Neoprene-X-Pansion Through Bed Loc Strip data

Enquire About This Product

Through Bed - 12mm Control Section

?? Insert the required overall depth including polyethylene section

12MM WIDE THROUGH BED NEOPRENE-X-PANSION LOC STRIP PROFILE GUIDE Specify Neoprene Colour, Wire Anchors and Overall Depth of the Product
Brass (1mm thick side plates)	Zinc (1mm thick side plates)	Stainless Steel (0.7mm thick side plates)	Metal Side Plate Depth	Accommodates Paving Maximum Thickness (with GW-50/SSW-50 wire anchors in place)
TBLSB-12 x 15/??	TBLSZ-12 x 15/??	TBLSS-12 x 15/??	31mm	15mm
TBLSB-12 x 35/??	TBLSZ-12 x 35/??	TBLSS-12 x 35/??	50mm	35mm
TBLSB-12 x 50/??	TBLSZ-12 x 50/??	TBLSS-12 x 50/??	65mm	50mm
TBLSB-12 x 65/??	TBLSZ-12 x 65/??	TBLSS-12 x 65/??	80mm	65mm
TBLSB-12 x 75/??	TBLSZ-12 x 75/??	TBLSS-12 x 75/??	90mm	75mm
TBLSB-12 x 85/??	TBLSZ-12 x 85/??	TBLSS-12 x 85/??	100mm	85mm
TBLSB-12 x 100/??	TBLSZ-12 x 100/??	TBLSS-12 x 100/??	115mm	100mm
☛ Custom heights to accommodate custom floor finish thicknesses available on request. ☛ ?? Denotes overall depth of the product required.

Brass	Zinc	Stainless Steel	Metal Side Plate Depth	Accommodates Paving Maximum Thickness
All dimensions in millimetres. Standard neoprene colour black. Grey & buff available on request.
TBLSB-12x15/?	TBLSZ-12x15/?	TBLSS-12x15/?	31mm	15mm
TBLSB-12x35/?	TBLSZ-12x35/?	TBLSS-12x35/?	50mm	35mm
TBLSB-12x50/?	TBLSZ-12x50/?	TBLSS-12x50/?	65mm	50mm
TBLSB-12x65/?	TBLSZ-12x65/?	TBLSS-12x65/?	80mm	65mm
TBLSB-12x75/?	TBLSZ-12x75/?	TBLSS-12x75/?	90mm	75mm
TBLSB-12x85/?	TBLSZ-12x85/?	TBLSS-12x85/?	100mm	85mm
TBLSB-12x100/?	TBLSZ-12x100/?	TBLSS-12x100/?	115mm	100mm

Latham Neoprene-X-Pansion Through Bed Loc Strips with 12mm control section and closed cell polyethylene tail are the best method of ensuring that the joint under the Loc Strip is free from debris. The polyethylene tail is designed to go through the bed to the slab.

Neoprene-X-Pansion Through Bed Loc Strips with 6mm are designed to be used in all hard flooring applications and are designed to be installed in conjunction with wet bedded flooring applications.

View and download our data sheets - PDF

Neoprene-X-Pansion Through Bed Loc Strip data

Enquire About This Product

Through Bed Loc Strips 3mm - 6mm Neoprene Control Joint

?? Insert the required overall depth including polyethylene section

6MM WIDE THROUGH BED NEOPRENE-X-PANSION LOC STRIPS WITH 3MM SIDE PLATES PROFILE GUIDE Specify Neoprene Colour, Wire Anchors and Overall Depth of the Product
Brass (3mm thick side plates)	Zinc (3mm thick side plates)	Metal Side Plate Depth	Accommodates Paving Maximum Thickness (with GW-50/SSW-50 wire anchors in place)
3MM-TBLSB-6 x 15/??	3MM-TBLSZ-6 x 15/??	31mm	15mm
3MM-TBLSB-6 x 35/??	3MM-TBLSZ-6 x 35/??	50mm	35mm
3MM-TBLSB-6 x 50/??	3MM-TBLSZ-6 x 50/??	65mm	50mm
3MM-TBLSB-6 x 65/??	3MM-TBLSZ-6 x 65/??	80mm	65mm
3MM-TBLSB-6 x 75/??	3MM-TBLSZ-6 x 75/??	90mm	75mm
3MM-TBLSB-6 x 85/??	3MM-TBLSZ-6 x 85/??	100mm	85mm
☛ Custom heights to accommodate custom floor finish thicknesses available on request. ☛ ?? Denotes overall depth of the product required. ☛ Contact Latham Australia with your requirements.

Latham Neoprene-X-Pansion Through Bed Loc® Strips with 3mm Brass or Zinc side plates, with closed cell polyethylene tail, are the best method of ensuring that the void under the Loc® Strip through the bed to the structural slab is maintained and free of debris.

Latham 6mm Neoprene-X-Pansion Through Bed Loc® Strips with 3mm Brass or Zinc side plates are generally used in interior applications where the expected thermal expansion of floor finish would be considered less than an external application. They are also suitable for external applications as well, however the bay sizes or distance between the strips will need to be reduced (see pages 4-6 for further set out and spacing details).

Latham 6mm Neoprene-X-Pansion Through Bed Loc® Strips with 3mm Brass or Zinc side plates are intended to be used in all hard flooring applications and are designed to be installed in conjunction with wet bedded flooring applications (see page 53 for further installation details).

Latham 6mm Neoprene-X-Pansion Through Bed Loc® Strips with 3mm Brass or Zinc side plates are supplied in standard 1800mm lengths and should be installed so as to minimise the frequency of butt joints and short lengths. Also 3-way and 4-way butt joint intersections should be avoided (see page 54 for further details).

View and download our data sheets - PDF

Neoprene-X-Pansion Through Bed Loc Strip data

Enquire About This Product

Through Bed Loc Strips 3mm - 12mm Neoprene Control Joint

?? Insert the required overall depth including polyethylene section

12MM WIDE THROUGH BED NEOPRENE-X-PANSION LOC STRIPSWITH 3MM SIDE PLATES PROFILE GUIDE Specify Neoprene Colour, Wire Anchors and Overall Depth of the Product
Brass (3mm thick side plates)	Zinc (3mm thick side plates)	Metal Side Plate Depth	Accommodates Paving Maximum Thickness (with GW-50/SSW-50 wire anchors in place)
3MM-TBLSB-12 x 15/??	3MM-TBLSZ-12 x 15/??	31mm	15mm
3MM-TBLSB-12 x 35/??	3MM-TBLSZ-12 x 35/??	50mm	35mm
3MM-TBLSB-12 x 50/??	3MM-TBLSZ-12 x 50/??	65mm	50mm
3MM-TBLSB-12 x 65/??	3MM-TBLSZ-12 x 65/??	80mm	65mm
3MM-TBLSB-12 x 75/??	3MM-TBLSZ-12 x 75/??	90mm	75mm
3MM-TBLSB-12 x 85/??	3MM-TBLSZ-12 x 85/??	100mm	85mm
☛ Custom heights to accommodate custom floor finish thicknesses available on request. ☛ ?? Denotes overall depth of the product required. ☛ Contact Latham Australia with your requirements.

Latham 12mm Neoprene-X-Pansion Through Bed Loc® Strips with 3mm Brass or Zinc side plates are generally used in exterior applications where the thermal expansion of floor finishes is greater than internal floor applications. They are also suitable for internal applications as well and are sometimes considered when architects and clients want to extend the bay size and increase the distance between control strips (see pages 4-6 for further set out and spacing details).

Latham 12mm Neoprene-X-Pansion Through Bed Loc® Strips with 3mm Brass or Zinc side plate plates are intended to be used in all hard flooring applications and are designed to be installed in conjunction with wet bedded flooring applications (see pages 52-53 for further installation details).

Latham 12mm Neoprene-X-Pansion Through Bed Loc® Strips with 3mm Brass or Zinc side plates are supplied in standard 1800mm lengths and should be installed so as to minimise the frequency of butt joints and short lengths. Also 3-way and 4-way butt joint intersections should be avoided (see page 54 for further details).

View and download our data sheets - PDF

Neoprene-X-Pansion Through Bed Loc Strip data

Enquire About This Product

Through Bed Loc Strips

< Back to Neoprene-X-Pansion Loc TILE & DIVIDING Strips