SYVB Series Visual Front Bars

Interior & Exterior Application

All special application nosings offer a way of taking positive steps to minimise the risk of accident and injury, in one of the most obvious areas in which such risks occur.

The range of Latham Special Application Safety Stair Tread Nosings have been developed to fill the need for a safety nosing that is not only practical, but also an attractive way of enhancing visibility on the leading edge of stairs and steps.

Features
Safety Yellow Visual Bars are available in all Asbraloy and Asbrabronz stair tread sections including Repair Tread System Type EHD (1 visual bar only). All other Asbraloy and Asbrabronz stair tread sections are available with one or two safety yellow visual bars or with full width safety yellow infill on request (specify 1SYVB for 1 safety yellow visual bar, specify 2SYVB for 2 safety yellow visual bars or specify full width safety yellow infill).

Optional secondary infill colours
On request optional Supagrit infill colours are available for the secondary part of tread i.e. tread that is not safety yellow. It is important when specifying that you indicate the colour required for secondary tread (sparkling black standard) and that you ensure this colour is compatible with surroundings and does not reduce the safety yellow visual effect. Standard infill colour is sparkling black and will be supplied if infill colours are not requested. All stair treads should be maintained clean for visual effect.

Lengths
All Asbraloy and Asbrabronz profiles are supplied factory cut to the site required length (up to 4600mm in one continuous length), complete with countersunk holes, stainless steel or brass screws (depending on the selected section) and plastic plugs. If specified at time of order treads can be supplied in full manufacturing lengths of 4600mm for on site cutting and drilling to suit clients supplied fixings.
Factory Cutting Tolerance: +0/-3mm.

Colour Range Slip Resistant Infill
Asbraloy Aluminium Suregrip standard infill colour is sparkling black. Asbrabronz Brass Suregrip standard infill colour is brown. Optional Supagrit infill colours available on request.

Finishes 
Asbraloy Aluminium profiles are supplied in mill finish. On request profiles can be supplied with a polished bullnose or in clear anodized finish at additional cost. In marine type applications Asbraloy profiles should be specified with 20 micron clear anodised finish. Asbrabronz  Brass profiles are supplied in brush finish. On request Asbraloy and Asbrabronz profiles can be supplied with a polished bullnose.

Screw Fixing Holes
Unless otherwise specified at time of order, holes will be provided in the treads to suit 8 gauge stainless steel or brass screws  at Latham’s standard 250mm centres.  Any special machining, mitering, modifications or alternative hole locations will be carried out at extra cost.

Additional Services and Accessories
Latham Australia offer a range of factory additional products and services to compliment the wide range of Asbraloy and Asbrabronz treads and inserts offered. These include leveling compounds, adhesives, cleaning and maintenance products, cutting wheels, varied fixing accessories, extra chemical resistant inserts, miter and special factory cutting, bevelled edge and much more. Further details are available.

Compliance and Testing Information
The Asbraloy and Asbrabronz range of treads and inserts have undergone rigorous and extensive including slip resistance testing, luminance testing and fire testing. Further details are available.

Special Note: Customers with special applications are invited to discuss them with us. Service Factors must be taken into consideration when selecting stair tread profiles.