Latham Concrete Topping Through-Bed Neoprene Loc® Strips are designed to be installed in concrete topping applications. They are manufactured to custom depths with the angle side plates designed to be fixed in place to the structural slab or form work. The Strips are designed to be ground insitu if required up to a maximum of 4mm.
Latham Concrete Topping Through-Bed Neoprene Loc® Strips are supplied in standard 1800mm lengths and should be installed so as to minimise the frequency of butt joints and short lengths. Also 3-way and 4-way butt joint intersections should be avoided (see page 54 for further details).
The systems are available in 6mm and 12mm neoprene widths and metal side plates with a thickness of 1mm and 3mm in Brass and Zinc.
Latham Concrete Topping Through-Bed Neoprene Loc® Strips are designed specifically for installation with optional GW50/SSW50 Wire Anchors for maximum control.
Latham Concrete Topping Through-Bed Neoprene Loc® Strips should be installed in all locations of stress concentration; at changes in direction; wherever localised movement is anticipated and around rigid and fixed large objects such as columns, stair and lift wells, light posts, across driveways, at access covers, across doorways and anywhere that may impede expansion and contraction of the topping.
NEOPRENE-X-PANSION LOC STRIPS FOR POURED TOPPING OR SLAB PROFILE GUIDE Specify Overall Depth of Angle and Tail. Specify Neoprene Colour & Wire Anchors. |
|
Brass (1mm & 3mm thick side plates) |
Zinc (1mm & 3mm thick side plates) |
CTLSB 50/?? X 6 |
CTLSZ 50/?? X 6 |
CTLSB 50/?? X 12 |
CTLSZ 50/?? X 12 |
CTLSB3MM-50/?? X 6 |
CTLSZ3MM-50/?? X 6 |
CTLSB3MM-50/?? X 12 |
CTLSZ3MM-50/?? X 12 |
☛ Custom heights to accommodate custom floor finish thicknesses available on request. ☛ Loop Loc Side Plate Depths 50mm. ☛ ?? Denotes overall depth of the product required. |
Latham Concrete Topping Through-Bed Neoprene Loc® Strips are designed to be installed in concrete topping applications. They are manufactured to custom depths with the angle side plates designed to be fixed in place to the structural slab or form work. The Strips are designed to be ground insitu if required up to a maximum of 4mm.
Latham Concrete Topping Through-Bed Neoprene Loc® Strips are supplied in standard 1800mm lengths and should be installed so as to minimise the frequency of butt joints and short lengths. Also 3-way and 4-way butt joint intersections should be avoided (see page 54 for further details).
The systems are available in 6mm and 12mm neoprene widths and metal side plates with a thickness of 1mm and 3mm in Brass and Zinc.
Latham Concrete Topping Through-Bed Neoprene Loc® Strips are designed specifically for installation with optional GW50/SSW50 Wire Anchors for maximum control.
Latham Concrete Topping Through-Bed Neoprene Loc® Strips should be installed in all locations of stress concentration; at changes in direction; wherever localised movement is anticipated and around rigid and fixed large objects such as columns, stair and lift wells, light posts, across driveways, at access covers, across doorways and anywhere that may impede expansion and contraction of the topping.
View and download our data sheets - PDF
Use the form below to get in touch and one of our consultants will get back to you as soon as possible.
Modal body text goes here.
Submit the following to receive your content download.
14 Tennyson Road Gladesville 2111 NSW Australia
Phone: +61 2 9879 7888
Fax: +61 2 9879 7666
info@latham-australia.com